MAXMETAL™
View
Sorting results by
- ACM panel with 3mm overall thickness
- Two 0.15mm aluminum panel faces
- 100% recycled polyethylene core
- Pre-painted both sides
- UL Recognized & FHWA approved
- ACM panel with 3mm overall thickness
- Two 0.12mm aluminum panel faces
- 100% recycled polyethylene core
- Pre-painted both sides, ready for vinyl or paint
- UL Recognized & FHWA approved
- Painted panels with a baked enamel finish
- Ultra-White finish on reverse of most colors
- Removable protective film on one side
- Vinyl, screenprint, or flatbed printable
- Alloy: 3003-H14 / 3105-H14
- Two 0.20mm aluminum skins
- 100% recycled polyethylene core
- 6mm overall thickness
- Pre-painted on both sides
- FHWA approved
- Digitally Printable
- ACM Panel with 3mm overall thickness
- Two 0.15mm aluminum panel faces
- 100% recycled polyethylene core
- Pre-painted on one side, ready for vinyl or paint
- .063, .080, .090, .125 thicknesses
- Bare aluminum, alloy 5052-H32
- Routable & bendable
- Direct from the factory
- Double-sided aluminum clad panel
- 5mm or 10mm overall thickness
- .013” thick aluminum face
- Corrugated plastic core
- UL listed
- .040 thick aluminum
- Static resistant
- Non-magnetic
- Anodized finish is transparent.
- .080 thick aluminum panel
- Reflective one side
- Engineer Grade & HIP options
- 5052-H38 aluminum alloy
- 4’x8’ alodine treated aluminum panels
- .125” .1” .080” .063” thicknesses
- Harder aluminum, not bendable
- 5052-H38 aluminum alloy
- Two .25mm steel sheets
- 100% recycled polyethylene core
- Unique magnetic receptive surface
- Galvanized steel Inhibits rust when used outdoors
- Pre-painted both sides
- ACM Panel with 3mm overall thickness
- Two 0.30mm aluminum panel faces
- 100% recycled polyethylene core
- Pre-painted both sides
- FHWA approved
- 3mm pre-painted ACM panel
- .20mm aluminum panel faces
- Solid polyethylene core
- Great for bending & routing
- Resists scratch & dent more than wood
- Vinyl, screen print, paint, & cut ready
- Aluminum face laminated to exterior grade plywood
- ½” overall thickness
- Single and double-sided options
- UL rated – double side only.
- Lightweight foam core panel
- 0.016” aluminum face, polystyrene core
- Available in ½” and 3/16”
- Easier to cut than standard metal
