Rated 5 out of 5 by Glyphics Graphics Inc. from Strong adhesive, easy to work with. Very easy to work for printing on, and cutting, and the adhesive is strong.

Rated 5 out of 5 by Esteban @ImprezWrapz from Sucper Sticky-Iky Great High tac Material. Used it for decals on some port-a-potties Great adhesion!

Rated 5 out of 5 by Rollinsigns from 3105HT Used it on Porta Johns and it worked awesome

Rated 2 out of 5 by 925NEVER Corp from First 15 linear feet were trash! We lost the first 15 feet of the roll because it was basically garbage. Not Grimco's fault at all - 100% the fault of Orafol. It never should have shipped (literally had 2 release liners taped together and overlapping that screwed up the vinyl so it was wrinkled for about the 15 feet). After we got through that issue the vinyl worked fine and is very high tac. However, it cannot be used with any pressurized cutting system (it immediately pushes all the adhesive out of its channels and you end up with that cr*p everywhere.)

Rated 1 out of 5 by rykerwraps from bad bad bad The Vinyl edge doesn’t match to the edge of the backer. When going through the rollers and being heated the glue seeps out and gums up the feed rollers. That in turn pulls up the edge of the vinyl causing head strikes. This is with the head in the high position. The rollers need to be de-gummed and half of the head wont print, most likely has glue in the nozzles. I downloaded and used their suggested icc profile which was the worst.