Customer Reviews
Rated 5 out of
5
by
High Impact Designz from
The 1360Z never disappoints.
We have been using Avery's 1360Z overlaminate for years with no issues. The high gloss paint like finish is the best in the industry.
Date published: 2020-08-13
Rated 5 out of
5
by
Chuck L from
Great Installation
Very nice installation
Date published: 2020-06-05
Rated 5 out of
5
by
TM Racing from
Motorcycle Helmet
First time using it... thank you! I wrapped a motorcycle helmet with Avery vinyl and laminate as my first trial with your vinyl. Worked very well! =)
Date published: 2019-10-03
Rated 5 out of
5
by
Jodi from
Great product
Love It!
Date published: 2019-06-11
Rated 5 out of
5
by
Anonymous from
Avery Dennison DOL 1360Z
This is the primary gloss CAST optically clear laminate that we use for the majority of our vehicle wraps.
Date published: 2019-02-26
Rated 4 out of
5
by
Signarama of Allentown from
DOL 1360Z, first time trying it
It's thicker than the Arlon 3210 I was using, less chance of wrinkling in the laminator, but you wind up with thick decals. Not necessarily a good thing. I abandoned the Arlon because of repeatedly finding defects with their products. Inconsistencies in the level of gloss on the laminates, evenly spaced streaks of dull in the center of the entire length on the roll. Unfortunately, the Avery had similar defects, not as bad, 1" X 1/2" dull spots about 8" apart for several yards at the beginning of the roll.
Date published: 2020-08-25
Rated 4 out of
5
by
Mike D. from
Great Lamination!
I have been using this lamination for a few years now and never had any issues. Great clarity , enhances the colors and gloss is really smooth. Highly conformable to extreme curves.
Date published: 2018-12-01
Rated 3 out of
5
by
Ms. KtK from
We've been having some Issues
We switched over to Avery from 3M products a little over a year ago for all of our vinyl products. Things were great in the beginning, but now in the most recent months we have begun to notice some issue with the laminate complying with the 1105 Vinyl. It tends to want to come up away from the print sometimes, or it looks as though it isn't always going down all of the way (blotches and such). We have tried different things with are laminating machine to make sure it wasn't on our end. The problem persist though and I'm starting to see it as a product issue. If this keeps up we may need to switch, we plan on reaching out to Avery to see what they suggest, but until we have some answers I won't be recommending this product to anybody.
Date published: 2020-03-04
