HP 831A Latex Inks
View
Sorting results by
- 775mL water-based latex Ink cartridges
- Prints come out dry and ready to finish
- UL GREENGUARD GOLD certification
- Standard weight application tape
- Tears cleanly and has easy release
- High tack rubber adhesive
- ACM panel with 3mm overall thickness
- Two 0.15mm aluminum panel faces
- 100% recycled polyethylene core
- Pre-painted both sides
- UL Recognized & FHWA approved
- High-capacity 700 mL solvent ink cartridges
- Compatible with S series printers
- Fluted polypropylene plastic substrate
- Great for routing, die cutting, and scoring
- Digital print or vinyl application receptive
- 2.5 mil, calendered PVC film
- Clear, permanent adhesive
- Easily weeding, blue contrast liner (white)
- 60+ vivid color options
- Perfect accessory stake for corrugated plastic blanks
- Prongs fit into vertical flutes
- Designed for use with 4mm corrugated plastic signs
- 3.2 mil calendered opaque film
- Excellent imageability, consistent prints
- Comply™ air release for easy installation
- Gloss or matte finishes available
- For flat and simple curve applications
- High-resolution prints, consistent results
- No daily manual cleaning helps avoid delays
- Environmentally friendly, recyclable printheads
- 4mm fluted polypropylene plastic substrate
- Great for, routing, die cutting, and scoring
- Digital print or vinyl application receptive
- Accommodates 9-gauge stakes
- 3 mil calendered PVC overlaminate film
- Permanent acrylic adhesive
- UV degradation, moisture, and abrasion protection
- Available in gloss, luster, and matte finishes
- Smooth, consistent surface
- Excellent ink adhesion
- Single-sided protective film
- Excellent white point
- Rolled from rail steel for superior strength
- 3/8” diameter punch holes on 1” centers
- Tapered on one end for easy installation
- 2 mil cast vinyl overlaminate
- Gloss finish for a wet paint look
- UV, weathering, & abrasion protection
- Cast film that does not shrink
- 13oz, single sided banner material
- Reverse wound: Print Side In orientation
- Protects surface from oils & grease
- Quick drying material: abrasion, water, smudge resistant
- 1000 x 1000 denier
- 3 mil calendered PVC cut vinyl film
- Permanent adhesive
- Outstanding durability, outdoor performance
- Quality vinyl, competitive price
- Release Liner Adhesion technology
- No adhesion build on stored graphics
- Wet or dry application
- Removes easily following application
- Pre-painted .080 white aluminum sign blanks
- Aluminum is bendable and routable
- Vinyl, UV, Screenprint ready
- Thermoplastic, permanent magnetic roll
- High-intensity, multi-pole magnetic arrangement
- Performs well in adverse weather
- 2 mil, removable cast vinyl film
- High gloss finish, opaque film
- Air release helps eliminate wrinkles
- Enhanced sliding and repositioning
- 2 mil, removable cast vinyl film
- Gray adhesive & Luster finish
- Controltac™ and Comply™ technology
- Up to 150% stretch ability
- 2 mil, cast vinyl film
- Pressure-sensitive, permanent adhesive
- Same color both sides
- Cuts as small as 0.375”
- Paper liner for easy weeding
- ACM panel with 3mm overall thickness
- Two 0.12mm aluminum panel faces
- 100% recycled polyethylene core
- Pre-painted both sides, ready for vinyl or paint
- UL Recognized & FHWA approved
- Versatility to replace multiple roll types
- Comply™ air release for easy, bubble free installation
- Gloss or matte finishes available
- Removable film, up to 7-year durability
- 13oz, single sided banner material
- Forward wound: Print Side Out orientation
- Matte or gloss options
- Quick drying material: abrasion, water, smudge resistant
- Consistent white point from roll-to-roll
- 1000 x 1000 denier
- ¾” angle iron frame
- Pre-punched mounting slots
- 6” rider below panel
- Pointed legs for ground insertion
- Painted panels with a baked enamel finish
- Ultra-White finish on reverse of most colors
- Removable protective film on one side
- Vinyl, screenprint, or flatbed printable
- Alloy: 3003-H14 / 3105-H14
- 1.3 mil cast overlaminate film
- Optically clear, high gloss finish
- Enhances color and depth of graphic applications
- Ultra-conformable face
- Abrasion, UV, & environmental protection
- All-plastic temporary display stand
- Holds 2 signs, 24” W x 36” H
- Quick-Change feature for slidable sign change
- Uses rigid substrates, 3/16” and thinner
- .040 Aluminum blank with square corners
- Pre-painted white both sides
- Ready for vinyl, screenprint, or flatbed printed graphics
- Routable and bendable
- Alloy: 3003-H14 / 3105-H14
- Paper face, polystyrene core board
- Bright, 92 white point
- Excellent print quality, ink adhesion
- High tack or heat activated models
- 3L water-based latex Ink cartridges
- Prints come out dry & ready to finish
- Scratch-resistance comparable to hard solvent inks
- No special ventilation required
- Brightest white point in the industry
- Superior ink adhesion
- Easily cut and fabricated
- Made in the USA
- 2.3 mil cast overlaminate film
- Clear film with gloss finish
- Moisture, abrasion, and UV protection
- For flat surfaces and simple curves
- Matte, reflection-free surface
- 40 color options available
- Warm peel transfer
- Self-Adhesive PET liner
- 3 mil intermediate calendered vinyl film
- Blue liner on the white films for easy weeding
- Removable with heat up to 3 years
- Permanent for up to five years
- Gloss finish unless otherwise stated
- 3 mil flexible calendered film
- Permanent gray adhesive
- Air-egress liner, easy installation
- Low initial tack, bonds in 24 hours
- Engineer Grade reflective film
- Pressure sensitive, removable adhesive
- Enclosed lens, retroreflective film
- Designed for easy cutting & weeding
- Two 0.20mm aluminum skins
- 100% recycled polyethylene core
- 6mm overall thickness
- Pre-painted on both sides
- FHWA approved
- Digitally Printable
- 2.5 mil soft calendered vinyl overlaminate film
- Economical solution for digital print protection
- UV extension factor of two years
- 3 mil PVC overlaminate film
- Permanent acrylic adhesive
- abrasion, moisture, and environmental protection
- Available in gloss, luster, and matte finishes
- Printing grade, High-Impact Polystyrene (HIPS)
- High opacity & cooler white point
- White substrate with matte finish
- Accepts a variety of inks
- Rigid polystyrene foam core board
- High impact, litho-grade polystyrene facers
- Lightweight, strong, & warp-resistant
- Adhesive ensures flatness and rigidity
- 5052-H38 alodized aluminum sign
- 3/8” mounting holes and radius corners
- MUTCD Identifier R1-1
- 3M™ reflective sheeting
- Can be machined, painted, routed, & more
- Lower thermal conductivity than glass
- UV Absorbent, high-gloss surface
- Masking
- White = White recling liner
- Clear = Blue poly liner
- Ultra-flexible 2 mil cast overlaminate
- Offers UV protection to prevent yellowing
- Up to 7-year durability
- Gloss, Matte, Satin, Optically Clear options
- 3 mil high performance cut vinyl film
- Patented Advanced Acrylic Adhesive Technology (PAAAT)
- Broad color palette for color confidence
- Efficient, precise conversion on commercial & craft plotters
- Outstanding durability and color fastness
- 400 ml HP 821 latex ink
- Compatible with L110 and L115 printers
- Prints emerge dry, odor-free, and ready to use
- 2 mil cast translucent vinyl film
- Matte finish eliminates glare
- Moisture resistant synthetic, lay-flat liner
- Ideal for internally lit sign faces
- Grommets punch and set in one single action
- For use with Fasnap grommet machine
- Eliminates pre-punching
- Grommets and washers sold together
- 3 finishes available
- ACM Panel with 3mm overall thickness
- Two 0.15mm aluminum panel faces
- 100% recycled polyethylene core
- Pre-painted on one side, ready for vinyl or paint
- 2 mil cast PVC film with permanent adhesive
- Clear, pressure-sensitive adhesive
- Excellent dimensional stability
- 84# silicone-coated liner, easy weeding & release
- High performance, 12V premium power supply
- Sleek and compact look with a durable design
- UL Retrofit Kit Classified and CSA Certified
- 7-year product warranty
- 2 mil cast vinyl wrap with air egress
- Low initial tack, easy graphic repositioning
- 100% opaque white film with high gloss finish
- 3.5 mil Dual cast vinyl wrap film
- For solid color vehicle detailing, decoration & wraps
- Controltac for easy repositioning
- Comply air release technology
- New H96W-SD-24 coming soon!
- High-performance, 24V premium power supply
- Sleek & compact look with a durable design
- Optimal heat distribution
- UL Retrofit Kit & CSA Certified
- 7-year product warranty
- 3 mil soft calendered PVC film
- Permanent, gray adhesive for light blockout
- Great for short & medium-term signage
- 2 mil cast vinyl overlaminate
- Clear film, matte finish
- Guards against scuffs, UV & weathering
- High flexibility, conforms to complex surfaces
- 2 mil, premium quality cast vinyl films
- Opaque film with high gloss finish
- Industry-leading weeding
- Outstanding durability, superior conformability
- UV, temperature, humidity & salt spray performance
- .080 aluminum blank, radius corners
- Traffic grade – Alodine treated bare
- Aluminum is routable, ready for top coat
- Alloy: 5052-H38
- .080 Aluminum Sign Blanks with 2 holes
- 3M EGP reflective one side
- Radius corners
- Ready for vinyl & screenprint graphics
- Alloy: 5052-H38, routable aluminum
- 2 mil cast vinyl overlaminate
- Luster finish for a semi-gloss look
- UV, weathering, & abrasion protection
- Cast film that does not shrink
- High Intensity Prismatic reflective sheeting
- Pressure sensitive, solvent-free adhesive
- Long term durability up to 10 years
- Meets ASTM D4956 Type III, IV
- 3.4 mil calendered vinyl film
- White film, gloss or matte finish
- Up to 5-year durability
- Excellent image clarity, vivid color
- .063 Aluminum blank with radius corners
- Pre-painted white both sides
- Ready for vinyl, screenprint, or flatbed printed graphics
- Routable and bendable
- Alloy: 3003-H14 / 3105-H14
- Maintenance cartridge for HP Latex printers
- For cleaning the printheads
- For HP L110, 115 and 300/500 series printers
- Brightest, most affordable cabinet solution
- 24-volt high efficiency system
- 165 lumens/watt
- 3”-15” ideal depth for single-sided signs
- 6”-30” ideal depth for double-sided signs
- 3 mil, soft calendered PVC film with a
- White or clear & gloss or matte options
- Clear permanent adhesive
- For short & medium-term indoor & outdoor use
